;=========================================================================== ; ; Advanced Gravis InterWave Board Plug And Play Serial EEPROM Map ; Copyright 1995 Advanced Micro Devices. All Rights Reserved. ; ; For the Advanced Gravis InterWave Board With B Step Silicon ; ; Tim Otholt, 09/11/95 - Initial version ; Tim Otholt, 09/29/95 - Removed Synth IRQ2 ; Removed channel 0 for Synth DMA1 and DMA2 ; Changed MPU I/O decode type from 10-bits to 16-bits ; Tim Otholt, 10/06/95 - Changed DMA type from 0x01 to 0x19 ; Changed CD-ROM dependent function type from ; 0x30 to 0x31. ; Removed DMA channel for CD-ROM. ; Predrag Kostic 10/24/95 - add Win95 logo support ; Predrag Kostic 11/16/95 - IRQ 10 removed for default config. ; Jayeson Lee-Steere 10/17/96 - Added IRQ 5 & 7 to Synth Device ; - Remove IRQ requirement for MPU device ; - IDE & Game Port always use the default ; Windows drivers. ; Jayeson Lee-Steere 10/31/96 - Changed a bunch of names and dependent ; functions for the resource allocation ; ; To write this EEPROM map to an EEPROM, use PNPMAP.EXE, provided by CSE. ; Do not use any version of EEWRITE; the various versions of EEWRITE ; floating around come in various flavors; some do not support comments, ; others do not support quoted strings. Others support comments only at ; the beginning of a line, not at the end. Just use PNPMAP.EXE, the ; officially supported version from Advanced Micro Devices. ; ;=========================================================================== ;--------------------------------------------------------------------------- ; PnP Header ; ; The PnP header contains the 72-bit "serial identifier", used by PnP ; initialization software to isolate the PnP device. ;--------------------------------------------------------------------------- 0x1E ; Advanced Gravis 'GRV' Vendor ID Byte 0 0x56 ; Advanced Gravis 'GRV' Vendor ID Byte 1 0x00 ; Advanced Gravis 'GRV0001' Vendor assigned product number (byte 0) 0x01 ; Advanced Gravis 'GRV0001' Vendor assigned product number (byte 1) 0x04 ; Serial Number Byte 0 0x34 ; Serial Number Byte 1 0x00 ; Serial Number Byte 2 0x12 ; Serial Number Byte 3 0x00 ; Special LFSR checksum (PnP specification appendix B) ; PNPMAP will calculate this for us ;--------------------------------------------------------------------------- ; PnP Version ; ; The PnP version entry tells the PnP initialization software which ; version of the PnP specification the hardware is compatible with. ;--------------------------------------------------------------------------- 0x0A ; PnP Version - Small item, PnP version tag, 2 bytes 0x10 ; InterWave is compatible with PnP spec 1.0 0x12 ; InterWave EEPROM version 1.0 ;--------------------------------------------------------------------------- ; ANSI Identifier string ; ; The Ansi Identifier string is an ASCII text string to display to the ; user for prompts and messages about the InterWave board. ;--------------------------------------------------------------------------- 0x82 ; ANSI identifier string - Large item, ID string tag 0x16 ; Length byte 0 (low byte) - In total, 22 bytes long 0x00 ; Length byte 1 (high byte) 'UltraSound Plug & Play' ; Actual ANSI identifier ;=========================================================================== ; Logical Device Block (0) ; ; The logical device defines the resources used by a specific function of ; the PnP device. The first logical device defined for InterWave is the ; InterWave synthesizer. Note that all resource information following ; the Logical Device Block applies to the previous Logical Device, until ; a new Logical Device Block is declared. ;=========================================================================== 0x15 ; Small item, logical device ID, 5 bytes long 0x1E ; Vendor ID byte 0 0x56 ; Vendor ID byte 1 0x00 ; Vendor assigned function ID (byte 0) 0x00 ; Vendor assigned function ID (byte 1) 0x02 ; flags[1] = supports commands at index 0x31 ;--------------------------------------------------------------------------- ; ANSI Identifier string ; ; The Ansi Identifier string is an ASCII text string to display to the user ; for prompts and messages about the InterWave board. ; ; Note - It turns out that the first release of Windows 95 does not use ; the information stored in this field; instead, it uses the .INF file to ; determine the ASCII string for this logical device. However, it does ; show up in the registry. ;--------------------------------------------------------------------------- 0x82 ; ANSI identifier string - Large item, ID string tag 0x0D ; Length byte 0 (low byte) - In total, 13 bytes long 0x00 ; Length byte 1 (high byte) 'Synth & Codec' ; Actual ANSI identifier ;--------------------------------------------------------------------------- ; InterWave Synthesizer I/O port , DMA and IRQ descriptor ; ; The I/O port descriptor defines which I/O ports are supported ; for the specified logical device. ; ; Note that the "start dependent function", and "end dependent ; function", is not part of the I/O port descriptor. It is used ; to tell the PnP configuration software that this logical device ; has a preferred configuration for this resource (in our case, ; the synthesizer's preferred I/O resource is 220h/320h/32Ch), ; and what that preferred configuration is. ; ; Although the InterWave can support a large number of possible ; I/O port configurations, for backwards compatibility with ; Gravis software (and to make Sound Blaster emulation work), ; the only addresses allowed are 220h/320h/32Ch, 240h/340h/34Ch ; 230h/330h/33Ch, 250h/350h/35Ch, 260h/360h/36Ch, ; We need two DMA channels and one IRQ channel ;--------------------------------------------------------------------------- ;-----------------------------; ; Configuration 0 (preferred) ; ;-----------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x00 ; 00 = Preferred resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0x00 ; Pic 0: 00 = 00000000 (No IRQs on lower PIC) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0x20 ; 20 = 00100000 (DMA 5) 0x12 ; DMA transfer types: 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0x80 ; 80 = 10000000 (DMA 7) 0x12 ; DMA transfer types: 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x20 ; Minimum base P2xR I/O address low 220h 0x02 ; Minimum base P2xR I/O address high 220h 0x20 ; Maximum base P2xR I/O address low 220h 0x02 ; Maximum base P2xR I/O address high 220h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x20 ; Minimum base P3xR I/O address low = 320h 0x03 ; Minimum P3xR I/O address high = 320h 0x20 ; Maximum base P3xR I/O address low = 320h 0x03 ; Maximum P3xR I/O address high = 320h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x2C ; Minimum PCODAR I/O address low = 32Ch 0x03 ; Minimum PCODAR I/O address high = 32Ch 0x2C ; Maximum PCODAR I/O address low = 32Ch 0x03 ; Maximum PCODAR I/O address high = 32Ch 0x01 ; Alignment 1 byte 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports ;------------------------------; ; Configuration 1 (acceptable) ; ;------------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x01 ; 01 = Acceptable resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0xA0 ; Pic 0: A0 = 10100000 (IRQ 5, 7) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x20 ; Minimum base P2xR I/O address low 220h 0x02 ; Minimum base P2xR I/O address high 220h 0x20 ; Maximum base P2xR I/O address low 220h 0x02 ; Maximum base P2xR I/O address high 220h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x20 ; Minimum base P3xR I/O address low = 320h 0x03 ; Minimum P3xR I/O address high = 320h 0x20 ; Maximum base P3xR I/O address low = 320h 0x03 ; Maximum P3xR I/O address high = 320h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x2C ; Minimum PCODAR I/O address low = 32Ch 0x03 ; Minimum PCODAR I/O address high = 32Ch 0x2C ; Maximum PCODAR I/O address low = 32Ch 0x03 ; Maximum PCODAR I/O address high = 32Ch 0x01 ; Alignment 1 byte 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports ;------------------------------; ; Configuration 2 (acceptable) ; ;------------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0x00 ; Pic 0: 00 = 00000000 (No IRQs on lower PIC) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0x20 ; 20 = 00100000 (DMA 5) 0x12 ; DMA transfer types: 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0x80 ; 80 = 10000000 (DMA 7) 0x12 ; DMA transfer types: 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x40 ; Minimum base P2xR I/O address low 240h 0x02 ; Minimum base P2xR I/O address high 240h 0x40 ; Maximum base P2xR I/O address low 240h 0x02 ; Maximum base P2xR I/O address high 240h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x40 ; Minimum base P3xR I/O address low = 340h 0x03 ; Minimum P3xR I/O address high = 340h 0x40 ; Maximum base P3xR I/O address low = 340h 0x03 ; Maximum P3xR I/O address high = 340h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x4C ; Minimum PCODAR I/O address low = 34Ch 0x03 ; Minimum PCODAR I/O address high = 34Ch 0x4C ; Maximum PCODAR I/O address low = 34Ch 0x03 ; Maximum PCODAR I/O address high = 34Ch 0x01 ; Alignment 1 bytes 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports ;------------------------------; ; Configuration 3 (acceptable) ; ;------------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0xA0 ; Pic 0: A0 = 10100000 (IRQ 5, 7) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x40 ; Minimum base P2xR I/O address low 240h 0x02 ; Minimum base P2xR I/O address high 240h 0x40 ; Maximum base P2xR I/O address low 240h 0x02 ; Maximum base P2xR I/O address high 240h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x40 ; Minimum base P3xR I/O address low = 340h 0x03 ; Minimum P3xR I/O address high = 340h 0x40 ; Maximum base P3xR I/O address low = 340h 0x03 ; Maximum P3xR I/O address high = 340h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x4C ; Minimum PCODAR I/O address low = 34Ch 0x03 ; Minimum PCODAR I/O address high = 34Ch 0x4C ; Maximum PCODAR I/O address low = 34Ch 0x03 ; Maximum PCODAR I/O address high = 34Ch 0x01 ; Alignment 1 byte 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports ;-------------------------------; ; Configuration 4 (acceptable) ; ;-------------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0xA0 ; Pic 0: A0 = 10100000 (IRQ 5, 7) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x30 ; Minimum base P2xR I/O address low 230h 0x02 ; Minimum base P2xR I/O address high 230h 0x30 ; Maximum base P2xR I/O address low 230h 0x02 ; Maximum base P2xR I/O address high 230h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x30 ; Minimum base P3xR I/O address low = 330h 0x03 ; Minimum P3xR I/O address high = 330h 0x30 ; Maximum base P3xR I/O address low = 330h 0x03 ; Maximum P3xR I/O address high = 330h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x3C ; Minimum PCODAR I/O address low = 33Ch 0x03 ; Minimum PCODAR I/O address high = 33Ch 0x3C ; Maximum PCODAR I/O address low = 33Ch 0x03 ; Maximum PCODAR I/O address high = 33Ch 0x01 ; Alignment 1 byte 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports ;-------------------------------; ; Configuration 5 (acceptable) ; ;-------------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0xA0 ; Pic 0: A0 = 10100000 (IRQ 5, 7) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x50 ; Minimum base P2xR I/O address low 250h 0x02 ; Minimum base P2xR I/O address high 250h 0x50 ; Maximum base P2xR I/O address low 250h 0x02 ; Maximum base P2xR I/O address high 250h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x50 ; Minimum base P3xR I/O address low = 350h 0x03 ; Minimum P3xR I/O address high = 350h 0x50 ; Maximum base P3xR I/O address low = 350h 0x03 ; Maximum P3xR I/O address high = 350h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x5C ; Minimum PCODAR I/O address low = 35Ch 0x03 ; Minimum PCODAR I/O address high = 35Ch 0x5C ; Maximum PCODAR I/O address low = 35Ch 0x03 ; Maximum PCODAR I/O address high = 35Ch 0x01 ; Alignment 1 byte 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports ;-------------------------------; ; Configuration 6 (acceptable) ; ;-------------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (Synth IRQ 1) 0xA0 ; Pic 0: A0 = 10100000 (IRQ 5, 7) 0x98 ; Pic 1: 98 = 10011000 (IRQ 15, 12, 11) 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 1) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x2A ; Small item, DMA descriptor, 2 bytes long (Synth DMA 2) 0xEA ; EA = 11101010 (DMA 7,6,5,3,1) 0x19 ; DMA transfer types: 8-bit and 16-bit transfers supported 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x60 ; Minimum base P2xR I/O address low 260h 0x02 ; Minimum base P2xR I/O address high 260h 0x60 ; Maximum base P2xR I/O address low 260h 0x02 ; Maximum base P2xR I/O address high 260h 0x01 ; Alignment 1 byte 0x10 ; P2xR I/O address width = 16 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x60 ; Minimum base P3xR I/O address low = 360h 0x03 ; Minimum P3xR I/O address high = 360h 0x60 ; Maximum base P3xR I/O address low = 360h 0x03 ; Maximum P3xR I/O address high = 360h 0x01 ; Alignment 1 byte 0x08 ; P3xR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x6C ; Minimum PCODAR I/O address low = 36Ch 0x03 ; Minimum PCODAR I/O address high = 36Ch 0x6C ; Maximum PCODAR I/O address low = 36Ch 0x03 ; Maximum PCODAR I/O address high = 36Ch 0x01 ; Alignment 1 byte 0x04 ; PCODAR I/O address width = 4 contiguous I/O ports 0x38 ; Small item, end dependent function, 0 bytes long ;=========================================================================== ; Logical Device Block (1) ; ; The next logical device on the InterWave part is the external ; device decoder (CD-ROM interface). Note that all the resource ; information following this block are setup for a board with an ; ATAPI compatible interface. ;=========================================================================== 0x15 ; Small item, logical device ID, 5 bytes long 0x41 ; Device ID "PNP0600" in standard PnP vendor ID notation 0xD0 0x06 0x00 0x02 ; flags[1] = supports commands at index 0x31 ;--------------------------------------------------------------------------- ; ANSI Identifier string ; ; The Ansi Identifier string is an ASCII text string to display ; to the user for prompts and messages about the InterWave board. ;--------------------------------------------------------------------------- 0x82 ; ANSI identifier string - Large item, ID string tag 0x0C ; Length byte 0 (low byte) - In total, 12 bytes long 0x00 ; Length byte 1 (high byte) 'ATAPI CD-ROM' ; Actual ASCII identifier ;--------------------------------------------------------------------------- ; InterWave CD-ROM IRQ and I/O port descriptors ; ; The I/O port descriptor defines which I/O ports are supported ; for the specified logical device. ; ; Note that the "start dependent function", and "end dependent ; function", is not part of the I/O port descriptor. It is used ; to tell the PnP configuration software that this logical device ; has a preferred configuration for this resource (in our case, ; the CD-ROM's preferred I/O resource is 1E8h/3EEh), and what ; that preferred configuration is. ;--------------------------------------------------------------------------- ;-----------------------------; ; Configuration 0 (preferred) ; ;-----------------------------; 0x31 ; Small item, start dependent function, 1 bytes long 0x00 ; 00 = preferred I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (CD-ROM IRQ) 0x00 ; Pic 0: 00 = 00000000 (No IRQs on lower PIC) 0x1C ; Pic 1: 1C = 00011100 (IRQ 12, 11, 10) 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0xE8 ; Minimum PCDRAR I/O address low = 1E8h 0x01 ; Minimum PCDRAR I/O address high = 1E8h 0xE8 ; Maximum PCDRAR I/O address low = 1E8h 0x01 ; Maximum PCDRAR I/O address high = 1E8h 0x01 ; 1 bytes alignment 0x08 ; PCDRAR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0xEE ; Minimum PATAAR I/O address low = 3EEh 0x03 ; Minimum PATAAR I/O address high = 3EEh 0xEE ; Maximum PATAAR I/O address low = 3EEh 0x03 ; Maximum PATAAR I/O address high = 3EEh 0x01 ; 1 bytes alignment 0x02 ; PATAAR I/O address width = 2 contiguous I/O ports ;------------------------------; ; Configuration 1 (acceptable) ; ;------------------------------; 0x31 ; Small item, start dependent function, 1 bytes long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (CD-ROM IRQ) 0x00 ; Pic 0: 00 = 00000000 (No IRQs on lower PIC) 0x1C ; Pic 1: 1C = 00011100 (IRQ 12, 11, 10) 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x68 ; Minimum PCDRAR I/O address low = 168h 0x01 ; Minimum PCDRAR I/O address high = 168h 0x68 ; Maximum PCDRAR I/O address low = 168h 0x01 ; Maximum PCDRAR I/O address high = 168h 0x01 ; 1 byte alignment 0x08 ; PCDRAR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x6E ; Minimum PATAAR I/O address low = 36Eh 0x03 ; Minimum PATAAR I/O address high = 36Eh 0x6E ; Maximum PATAAR I/O address low = 36Eh 0x03 ; Maximum PATAAR I/O address high = 36Eh 0x01 ; 1 byte alignment 0x02 ; PATAAR I/O address width = 2 contiguous I/O ports ;------------------------------; ; Configuration 2 (acceptable) ; ;------------------------------; 0x31 ; Small item, start dependent function, 1 bytes long 0x01 ; 01 = Acceptable I/O resource configuration 0x22 ; Small item, IRQ tag, 2 bytes long (CD-ROM IRQ) 0x00 ; Pic 0: 00 = 00000000 (No IRQs on lower PIC) 0x9C ; Pic 1: 9C = 10011100 (IRQ 15, 12, 11, 10) 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode supported 0x70 ; Minimum PCDRAR I/O address low = 170h 0x01 ; Minimum PCDRAR I/O address high = 170h 0x70 ; Maximum PCDRAR I/O address low = 170h 0x01 ; Maximum PCDRAR I/O address high = 170h 0x01 ; 1 byte alignment 0x08 ; PCDRAR I/O address width = 8 contiguous I/O ports 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x76 ; Minimum PATAAR I/O address low = 376h 0x03 ; Minimum PATAAR I/O address high = 376h 0x76 ; Maximum PATAAR I/O address low = 376h 0x03 ; Maximum PATAAR I/O address high = 376h 0x01 ; 1 byte alignment 0x02 ; PATAAR I/O address width = 2 contiguous I/O ports 0x38 ; End dependent function tag ;=========================================================================== ; Logical Device Block (2) ; ; The third logical device on the InterWave part is the joystick ; (game port) interface. The joystick only uses a single ; I/O port. ;=========================================================================== 0x15 ; Small item, logical device ID, 5 bytes long 0x41 ; Device ID "PNPB02F" in standard PnP vendor ID notation 0xD0 0xB0 0x2F 0x02 ; flags[1] = supports commands at index 0x31 ;--------------------------------------------------------------------------- ; ANSI Identifier string ; ; The Ansi Identifier string is an ASCII text string to display ; to the user for prompts and messages about the InterWave board. ;--------------------------------------------------------------------------- 0x82 ; ANSI identifier string - Large item, ID string tag 0x09 ; Length byte 0 (low byte) - In total, 9 bytes long 0x00 ; Length byte 1 (high byte) 'Game Port' ; Actual ANSI identifier ;--------------------------------------------------------------------------- ; InterWave Joystick I/O descriptor block ;--------------------------------------------------------------------------- ;--------------------------------------------------------------------------- ; Best configuration - uses standard port of 201 ;--------------------------------------------------------------------------- ;0x31 ; Small item, start dependent function, 1 byte long ;0x00 ; 00 = Preferred I/O resource configuration 0x47 ; Small item, I/O port descriptor, 7 bytes long 0x01 ; 16 bit decoding 0x01 ; P2xR Min. I/O address low = 201h 0x02 ; P2xR Min. I/O address high = 201h 0x01 ; P2xR Max. I/O address low = 201h 0x02 ; P2xR Max. I/O address high = 201h 0x01 ; alignment 1 0x01 ; P2xR I/O address width = 1 contiguous I/O ports ;--------------------------------------------------------------------------- ; Can't get 201, well take anything then ;--------------------------------------------------------------------------- ;0x31 ; Small item, start dependent function, 1 byte long ;0x02 ; 02 = Sub-optimal I/O resource configuration ;0x47 ; Small item, I/O port descriptor, 7 bytes long ;0x01 ; 16 bit decoding ;0x00 ; P2xR Min. I/O address low = 200h ;0x02 ; P2xR Min. I/O address high = 200h ;0xFF ; P2xR Max. I/O address low = 2ffh ;0x02 ; P2xR Max. I/O address high = 2ffh ;0x01 ; alignment 1 ;0x01 ; P2xR I/O address width = 1 contiguous I/O ports ;0x38 ;Small item, end of dependent function ;=========================================================================== ; Logical Device Block (3) ; ; The fourth logical device on the InterWave part is the Adlib ; FM register set and Sound Blaster interrupt line. ;=========================================================================== 0x15 ; Small item, logical device ID, 5 bytes long 0x1E ; Vendor ID byte 0 0x56 ; Vendor ID byte 1 0x00 ; Vendor assigned function ID (byte 0) 0x03 ; Vendor assigned function ID (byte 1) 0x02 ; flags[1] = supports commands at index 0x31 ;--------------------------------------------------------------------------- ; ANSI Identifier string ; ; The Ansi Identifier string is an ASCII text string to display ; to the user for prompts and messages about the InterWave board. ;--------------------------------------------------------------------------- 0x82 ; ANSI identifier string - Large item, ID string tag 0x13 ; Length byte 0 (low byte) - In total, 19 bytes long 0x00 ; Length byte 1 (high byte) 'SB Compatible Audio' ; Actual ANSI identifier ;--------------------------------------------------------------------------- ; InterWave Sound Blaster IRQ structure ; ; The IRQ structure defines which IRQs are supported for the ; specified logical device. In our case, we require one IRQ ; for the InterWave Sound Blaster device. ; ; Note: The familiar concept of describing ISA bus IRQ 2 as ; "IRQ 2" or "IRQ 2/9" is not valid for the PnP EEPROM. ; Specifying ISA bus IRQ 2 in the EEPROM by setting IRQ 2 ; causes Windows 95 to prevent the interrupt from being ; selected (conflict with the interrupt controller). The ; correct way to specify ISA bus IRQ 2 in the PnP EEPROM ; is by specifying IRQ 9. ;--------------------------------------------------------------------------- 0x22 ; Small item, IRQ tag, 2 bytes long (SB IRQ) 0xA0 ; Pic 0: A0 = 10100000 (IRQ 7, 5) 0x00 ; Pic 1: 00 = 00000000 (no upper IRQs allowed for SB) ;--------------------------------------------------------------------------- ; InterWave SB DMA structure ; ; The DMA structure defines which DMA channels are supported for ; the specified logical device. In our case, we require one DMA ; channel (1) for Sound Blaster DMA. ;--------------------------------------------------------------------------- 0x2A ; Small item, DMA descriptor, 2 bytes long (SB DMA) 0x02 ; 02 = 00000010 (DMA 1 only) 0x08 ; DMA transfer types: 8-bit supported, compatibility mode ;--------------------------------------------------------------------------- ; InterWave Adlib (Yamaha OPL-II FM) I/O descriptor block ; ; We only support a single I/O address for the Adlib FM, for ; games compatibility. ;--------------------------------------------------------------------------- 0x47 ; Small item, I/O port descriptor 0x01 ; 16 bit address decode 0x88 ; Minimum FM I/O address low = 388h 0x03 ; Minimum FM I/O address high = 388h 0x88 ; Maximum FM I/O address low = 388h 0x03 ; Maximum FM I/O address high = 388h 0x01 ; Alignment 1 byte 0x02 ; FM I/O address width = 2 consecutive I/O ports ;=========================================================================== ; Logical Device Block (4) ; ; The last logical device on the InterWave part is the MPU-401 ; device. ;=========================================================================== 0x15 ; Small item, logical device ID, 5 bytes long 0x1E ; Vendor ID byte 0 0x56 ; Vendor ID byte 1 0x00 ; Vendor assigned function ID (byte 0) 0x04 ; Vendor assigned function ID (byte 1) 0x02 ; flags[1] = supports commands at index 0x31 ;--------------------------------------------------------------------------- ; ANSI Identifier string ; ; The Ansi Identifier string is an ASCII text string to display ; to the user for prompts and messages about the InterWave board. ;--------------------------------------------------------------------------- 0x82 ; ANSI identifier string - Large item, ID string tag 0x10 ; Length byte 0 (low byte) - In total, 16 bytes long 0x00 ; Length byte 1 (high byte) 'MPU-401 GM Music'; Actual ANSI identifier ;--------------------------------------------------------------------------- ; InterWave MPU-401 (General MIDI) I/O descriptor block ; ; Many games support a variety of addresses for the MPU-401 I/O ; base address. For PnP, we are telling the PnP manager that ; we support: 330h, 300h, 310h, 320h, 340h. ;--------------------------------------------------------------------------- ;-----------------------------; ; Configuration 0 (preferred) ; ;-----------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x00 ; 00 = Preferred I/O resource configuration 0x47 ; Small item, I/O port descriptor, 7 bytes long 0x01 ; 16 bit decoding 0x30 ; Min. I/O address low = 330h 0x03 ; Min. I/O address high = 330h 0x30 ; Max. I/O address low = 330h 0x03 ; Max. I/O address high = 330h 0x02 ; alignment 2 0x02 ; I/O address width = 2 contiguous I/O ports ;-----------------------------; ; Configuration 1 (alternate) ; ;-----------------------------; 0x31 ; Small item, start dependent function, 1 byte long 0x02 ; 02 = Sub-optimal I/O resource configuration 0x47 ; Small item, I/O port descriptor, 7 bytes long 0x01 ; 16-bit I/O decode 0x00 ; Lowest I/O base address (low byte) = 300h 0x03 ; Lowest I/O base address (high byte) = 300h 0x40 ; Highest I/O base address (low byte) = 340h 0x03 ; Highest I/O base address (high byte) = 340h 0x10 ; I/O port must be aligned on a 0x10 byte boundary 0x02 ; Cox-Missing 2 byte consecutive ;-----------------------------; ; Configuration 2 (alternate) ; ;-----------------------------; ;0x31 ; Small item, start dependent function, 1 byte long ;0x02 ; 02 = Sub-optimal I/O resource configuration ;0x47 ; Small item, I/O port descriptor, 7 bytes long ;0x01 ; 16-bit I/O decode ;0x32 ; Lowest I/O base address (low byte) = 332h ;0x03 ; Lowest I/O base address (high byte) = 332h ;0x26 ; Highest I/O base address (low byte) = 336h ;0x03 ; Highest I/O base address (high byte) = 336h ;0x02 ; I/O port must be aligned on a 0x02 byte boundary ;0x02 ; Cox-Missing 2 byte consecutive 0x38 ; End dependent function ;=========================================================================== ; End tag ; ; The end tag defines the end of the EEPROM, and the EEPROM ; checksum. Note that the checksum of zero means "unknown ; checksum", and that the PnP manager should not bother to verify ; that the EEPROM checksum is correct. ;=========================================================================== 0x79 0x00